901026
محصول جدید
آردوینو یک برد اپن سورس مناسب برای نمونه سازی می باشد و بر اساس سخت افزار و نرم افزار منعطف و ساده پایه ریزی و طراحی شده است. اگر شما دانشجو ،هنرمند، طراح و یا علاقه مند به سرگرمی و یا ایجاد سیستم های تعاملی هستید حتی با تجربه و دانش بسیار اندک در حوزه الکترونیک می توانید از آردوینو برای ایجاد پروژه خود استفاده نمایید!
این محصول در انبار موجود نیست
اخطار: آخرین موجودی فعلی!
تاریخ در دسترس بودن
آردوینو لئوناردو یک برد بر اساس میکرو کنترلر ATmega32u4 میباشد . دارای ۲۰ پایه ورودی خروجی دیجیتال است ، کریستال ۱۶ مگاهرتز ، کانکتور میکرو usb ، جک پاور ، هدر ICSP و دکمه ریست و بطور کلی میشه گفت هر چیزی که یک برد میکروکنترلری به آن نیاز دارد . کافیست که برد را با یک کابل به کامپیوتر و فیش پاور آن را به یک آداپتور AC به DC یا یک باطری متصل کنید .
The Arduino Leonardo is a microcontroller board based on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHzcrystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board; these are detailed on the getting started page.
Description:
Microcontroller ATmega32u4
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 20
PWM Channels 7
Analog Input Channels 12
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
Flash Memory 32 KB (ATmega32u4) of which 4 KB used by bootloader
SRAM 2.5 KB (ATmega32u4)
EEPROM 1 KB (ATmega32u4)
Clock Speed 16 MHz
Length 68.6 mm
Width 53.3 mm
Weight 20g